IBM H Series Installation And Service Manual page 72

Call Out From the Call-In/Call-Out Setup Menu, go to the Serial Port Selection Menu and
disable call-out on both serial ports.
Step 1540-1
1. Insert the diagnostic CD-ROM into the CD-ROM drive.
Note: If you cannot insert the diagnostic CD-ROM go to "Step 1540-2" on
page 2-39.
2. Ensure that the diagnostics and the operating system are shut down.
3. Turn the power off.
4. Turn the power on.
5. When the keyboard indicator is displayed (the word keyboard on an ASCII ter-
minal or the keyboard and hand icon on a graphical display), press the F5 key
on the directly-attached keyboard or the number 5 key on an ASCII terminal.
6. Enter the appropriate password if prompted to do so.
Is the "Please define the System Console" screen displayed?
NO Go to "Step 1540-2" on page 2-39
YES Go to "Step 1540-19" on page 2-57.
2-38
RS/6000 Enterprise Server Model H Series Installation and Service Guide