IBM H Series Installation And Service Manual page 368

Processor Configuration/Deconfiguration Menu
Use this option to view and modify processor configuration.
The following is an example of the Processor Configuration/Deconfiguration
Menu:
Processor Configuration/Deconfiguration Menu
Processor number
. Configured by system ( x )
1. Configured by system ( x )
2. Configured by system ( x )
3. Configured by system ( x )
98. Return to Previous Menu
To change the configuration, select the processor number
1>
The user can manually configure or deconfigure any processor, regardless of
failure status, through this service processor menu. The configuration process
takes place during the system power-up. Therefore, the configuration displayed
in standby mode reflects the configuration during the last boot.
To view the current configuration, access the service processor menu after the
system starts. When the user selects a processor, its state toggles between con-
figured and deconfigured. Processors that are not present are not listed. A
processor can be in any of the following four states:
– Configured by system: The processor is present, and has not exceeded the
failure threshold. It has been configured by the system and is available.
– Deconfigured by system: The processor is present, but has exceeded the
failure threshold. It is deconfigured by the system and is currently unavail-
able.
– Manually configured: The processor is present and available. It has been
configured by the user through the service processor menus.
– Manually deconfigured: The processor is present, but unavailable. It has
been deconfigured by the user through the service processor menus.
The error status of each processor is shown in parenthesis after the state of the
DIMM, according to the following table:
– 0x0 No failures logged against the processor
– 0x1R Built-in Self-test (BIST) failure
– 0x2R Power-on Self-test (POST) failure
– 0x3n Run-time non-recoverable machine check error
C-18
RS/6000 Enterprise Server Model H Series Installation and Service Guide