IBM H Series Installation And Service Manual page 365

Fan : A stopped fan detected
Fan 1: A stopped fan detected
Fan 2: A stopped fan detected
Fan 3: A stopped fan detected
I/O Temperature is operating within normal tolerances
5. Volts: A low 5. Voltage reading detected
3.3 Volts: A low 3.3 Voltage reading detected
5. Standby Volts: is operating within normal tolerance
+12. Volts: A low +12. voltage reading detected
-12. Volts: A high -12. voltage reading detected
(Press Return to Continue)
System Information Menu for Model H70
This menu provides access to system configuration information, error logs, system
resources, and processor configuration.
SYSTEM INFORMATION MENU
1. Read VPD Image from Last System Boot
2. Read Progress Indicators from Last System Boot
3. Read Service Processor Error Logs
4. Read System POST Errors
5. Read NVRAM
6. Read Service Processor Configuration
7. View System Environmental Conditions
8. Processor Configuration/Deconfiguration Menu
9. Memory Configuration/Deconfiguration Menu
1 . Enable/Disable CPU Repeat Guard
Currently Enabled
11. Enable/Disable MEM Repeat Guard
Currently Enabled
98. Return to Previous Menu
99. Exit from Menus
1>
Read VPD Image from Last System Boot
Displays manufacturer's vital product data (VPD), such as serial numbers, part
numbers, and so on, that were stored from the system boot prior to the one in
progress now.
Read Progress Indicators from Last System Boot
System Environmental Conditions
(System Power is currently off.)
Appendix C. Service Processor Menus
C-15