Installation - Chrysler Vehicle User Manual

TJ
REAR WINDOW DEFOGGER SWITCH (Continued)

INSTALLATION

(1) Install the rear window defogger switch recep-
tacle to the back of the accessory switch bezel and
push switch into the bezel.
(2) Plug the wire harness connectors to the rear of
the accessory switches and the cigar lighter/power
outlet.
(3) Install the accessory switch bezel to the instru-
ment panel.
(4) Install the four screws that secure the acces-
sory switch bezel to the instrument panel. (Fig. 7)
(5) Install the center bezel to the instrument panel
(Refer to 23 - BODY/INSTRUMENT PANEL/CLUS-
TER BEZEL - INSTALLATION).
(6) Connect the negative battery cable.
Fig. 7 Accessory Switch Bezel Remove/Install
1 - INSTRUMENT PANEL
2 - WIRE HARNESS CONNECTORS
3 - SCREW (4)
4 - CIGAR LIGHTER
5 - ACCESSORY SWITCH BEZEL
HEATED SYSTEMS 8G - 7