Chrysler Vehicle User Manual page 163

3 - 104 REAR AXLE - 194RBI
DIFFERENTIAL CASE
BEARINGS
REMOVAL
(1) Remove differential from the housing.
(2) Remove bearings from the differential case
with Puller/Press C-293-PA , C-293-39 Blocks and
Plug SP-3289 (Fig. 56).
Fig. 56 BEARING REMOVAL
1 - ADAPTERS
2 - BEARING
3 - DIFFERENTIAL
4 - PLUG
5 - PULLER
INSTALLATION
(1) Install differential side bearings with Installer
C-3716-A with Handle C-4171 (Fig. 57).
(2) Install differential in the housing.
PINION GEAR/RING GEAR
REMOVAL
NOTE: The ring and pinion gears are serviced in a
matched set. Never replace one gear without replac-
ing the other gear.
(1) Remove differential from axle housing.
Fig. 57 DIFFERENTIAL CASE BEARINGS
1 - HANDLE C-4171
2 - DIFFERENTIAL
3 - BEARING
4 - TOOL C-3716–A
(2) Place differential case in a vise with soft metal
jaw.
(3) Remove ring gear bolts from the differential
case.
(4) Drive ring gear from the differential case with
a dead-blow hammer (Fig. 58).
Fig. 58 RING GEAR
1 - CASE
2 - RING GEAR
3 - DEAD-BLOW HAMMER
(5) Hold pinion yoke with Wrench 6958 and
remove pinion yoke nut and washer.
TJ