Chrysler Vehicle User Manual page 220

TJ
DISC BRAKE CALIPERS (Continued)
Fig. 6 Lining Wear Compensation By Piston Seal
1 - PISTON
2 - CYLINDER BORE
3 - PISTON SEAL BRAKE PRESSURE OFF
4 - CALIPER HOUSING
5 - DUST BOOT
6 - PISTON SEAL BRAKE PRESSURE ON
REMOVAL
REMOVAL - FRONT
(1) Raise and support vehicle.
(2) Remove front wheel and tire assembly.
(3) Drain small amount of fluid from master cylin-
der brake reservoir with suction gun.
(4) Bottom caliper piston in bore with C-clamp.
Position clamp screw on outboard brake shoe and
clamp frame on rear of caliper (Fig. 7). Do not allow
clamp screw to bear directly on outboard shoe
retainer spring. Use wood or metal spacer
between shoe and clamp screw.
Fig. 7 Bottoming Caliper Piston With C-Clamp
1 - CALIPER BOSS
2 - OUTBOARD BRAKESHOE
3 - C-CLAMP
(5) Remove brake hose mounting bolt and discard
washers (Fig. 8).
Fig. 8 Brake Hose And Bolt
1 - FITTING WASHERS
2 - CALIPERS
(6) Remove caliper mounting bolts (Fig. 9).
Fig. 9 Caliper Mounting Bolts
1 - CALIPER MOUNTING BOLT (2)
2 - CALIPER
BRAKES - BASE 5 - 11