Configuring The System For Snmp Management - RADVision Scopia XT1000 Administrator's Manual

Step 4
Set the fields as required.
Note:
Field Name
AT commands management Enables/disables AT Command API for remote control.
Enable all addresses
Address
SubNet mask
Step 5
Press

Configuring the System for SNMP Management

iVIEW/NMS integration allows remote monitoring, configuring, upgrading and control features of
SCOPIA XT1000 terminals, using SNMP (Simple Network Management Protocol) and an AT
command-based protocol on TCP/IP . In particular, these features have been introduced:
Procedure
Step 1
In the Administrator settings menu scroll to Utilities.
Step 2
Select Remote access.
Step 3
Select the SNMP page.
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
To configure the network, contact your network administrator.
Save.
•
Monitoring - iVIEW/NMS can request identification and access capabilities from the terminal.
•
Status traps - iVIEW/NMS is able to detect if the terminal is turned on, and its call status.
Description
If set to Yes, enables access to the Codec Unit from any IP address
in a network. If set to No, configure Address and SubNet mask.
Enter the IP address allowed to access the system.
Enter the SubNet mask associated with the IP address.
'Maintenance Tasks' | 60