Pairing A Remote Control Unit With A Codec Unit - RADVision Scopia XT1000 Administrator's Manual

Pairing a XT1000 Remote Control Unit with a Codec Unit
You can use the Remote Control Unit to control one or more systems in a same room, thus avoiding
interferences with other Remote Control Units. To do so, enter the same code in your Remote
Control Unit and in your system software. All Remote Control Units are supplied with a default
code (01).
Procedure
Step 1
On the Main Menu page, scroll to Settings.
Step 2
Press
Step 3
Using the arrow keys, scroll to Remote control code and type a two-digit code in the field. The
allowed range of code is between 01 and 99.
Step 4
Press
Step 5
Simultaneously press
Step 6
Using the keypad, type the two-digit code you just entered in the Remote control code field.
Step 7
Press
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
User settings. The General page appears on the display.
Save.
and . The
Finish.
button becomes red.
'Initial Configuration' | 21