RADVision Scopia XT1000 Administrator's Manual page 60

Step 3
In the Web page set the fields as required.
Note:
Field Name
Web management
HTTPS
Enable all addresses If set to Yes, enables access to SCOPIA XT1000 from any IP address in a
Address
SubNet mask
User name
Password
Step 4
Press
Step 5
Start a web browser on your PC (Internet Explorer V7).
Step 6
Enter the Codec Unit's IP address in the address bar of the browser.
Step 7
Once in this page you can place a call, or change system settings as required.
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
To configure the network, contact your network administrator.
Description
Enables/disables Web access to SCOPIA XT1000 (using Telnet via IP and
ISDN connections).
Enables/disables https service, i.e. the Secure Socket Layer (SSL)
function.
network. If set to No, configure Address and SubNet mask of PC (or PCs)
that should be enabled to remotely access SCOPIA XT1000.
Enter the IP address allowed to access SCOPIA XT1000.
Enter the SubNet mask associated with the IP address.
Change the Web/Telnet default user name (Admin).
Change the Web/Telnet default password (1234).
Save.
Figure 3-1 Web Access
'Maintenance Tasks' | 54