Configuring Other Audio Inputs - RADVision Scopia XT1000 Administrator's Manual

Step 4
Set the fields as required.
Field Name
Enabled
Gain
Echo canceller
Step 5
Press

Configuring Other Audio Inputs

You may also access this page from a previous screen in the configuration.
Procedure
Step 1
In the Administrator settings menu select I/O connections.
Step 2
Scroll to Audio - Inputs.
Step 3
Select the SPDIF/HD page.
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Description
Enables/disables the Microphone Pod.
Use the slider to adjust the fixed Gain Control, setting the voice signal
to the desired level. The AGC reduces the volume if the audio is strong
and raises the volume if the audio is weak.
Enable the echo canceller when working with an external microphone
system that does not contain echo cancellation. Disable this setting
when working with an external mixer that handles echo cancellation. If
enabled check the field settings in
page 29, and configure if required.
Save.
Configuring the EchoCanceller
'Initial Configuration' | 28