Configuring Other Video Equipment; Configuring The Monitor - RADVision Scopia XT1000 Administrator's Manual

Configuring Other Video Equipment

You may also access this page from a previous screen in the configuration.
Procedure
Step 1
In the Administrator settings menu select I/O connections.
Step 2
Scroll to Cameras.
Step 3
Select the DVI page.
Step 4
Set the fields as required.
Field Name
Enable
Name
Contrast
Brightness
Auto Adjust
Reset
Note:
Step 5
Press

Configuring the Monitor

Note:
You can return to the Default Auto settings at any time by holding down simultaneously
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Description
Enables/disables the DVI input.
Enter the input name. The selected name will appear in the system area
of the display in addition to the input icon.
Sets black level.
Sets brightness level.
In case of graphic issues, automatically adjusts the incoming image to
display correctly on the screen.
In case of issues when connecting a PC to the system, resets the settings
in this page.
You may connect a camera to the DVI-I input, but it will be managed as PC content.
Save.
and .
'Initial Configuration' | 24