Scopia Xt1000 Series As Embedded Mcus - RADVision Scopia XT1000 Administrator's Manual

SCOPIA XT1000 Series as Embedded MCUs

The MCU capability is embedded in the SCOPIA XT1000 and can be activated by registering the
Codec Unit serial number and product key in the XT1000 web registration page reserved to SCOPIA
XT1000 purchasers. See http://www.radvision.com/XT1000.
The SCOPIA XT1000 HD Room System has the capability of deploying two levels of MCUs:
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
•
High motion 720p60 capture is required. The Standard Camera does not support 60fps
capture.
•
There are very low light conditions. In general, the Sony Camera captures better image in low
light conditions.
Figure 1-1
•
SCOPIA XT1004 - Basic MCU level with up to 4 participants (1 Local and 3 Remote). Each
participant receives up to 720p and can send up to 448p.
•
SCOPIA XT1009/XT1209 - Advanced MCU level with up to 9 Participants (1 Local and 8
Remote). Each participant receives up to 720p and can send up to 488p depending on the
selected CP layout. Only the Active Speaker can send up to 448p. SCOPIA XT1009 features the
XT1000 Standard Camera, while SCOPIA XT1209 features a Sony Camera.
SCOPIA XT1000 Series as Endpoints
'Architecture Considerations' | 2