Enabling The Temporary License; Enabling The License From The Codec Unit Web Page - RADVision Scopia XT1000 Administrator's Manual

Enabling the Temporary License

Work with a temporary license for a limited period of time if you cannot obtain the license key
immediately.
Procedure
Step 1
After proceeding as described in Step 1 of
Use the Codec Unit with full features for a time limited mode of 24 hours. The remaining
activation time is shown in the system area of the screen, next to the time.
Step 2
After the temporary work time expires, the display shows the Enable license page. Insert the
license key.
Step 3
Press

Enabling the License from the Codec Unit Web Page

Procedure
Step 1
Start a web browser on your PC (Internet Explorer V7).
Step 2
Enable download management as described in
page
RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0
Figure 2-2
Figure 2-3
Enable license.
56.
Enabling the License at Setup page
Temporary License Timeout
Enable license Page
Configuring the Codec Unit for Remote Upgrade
8, press Start.
'Initial Configuration' | 9