Switch Door - Asko TLS752 Manual

Table of Contents

1. Function

• This is a switch that checks whether the door is open or closed.

• If the user opens the door, this switch disconnects power supply to the

motor and turns the lamp on.

• If the user closes the door, this switch connects power supply to the

motor and turns the lamp off.

2. Specification

• A push switch - stroke 70mm, tree terminals

pushed-down : COM and NO are connected (NO are connected to motor)

free state : COM and NC are connected (NC are connected to door lamp)

• Electric rating : 7.5A 125V

• Type name : SPE110F

3. Checking method of mal-function

• This switch applies power to the motor when the door is closed and to thelamp when the door is opened.

• Run the dryer by pressing the power and start buttons.

• As the drum begins rotating, check if the lamp is turned on after opening the door.

• If the drum does not rotate, check the door switch contact.

Cf) Check a belt switch and thermostat fan also for the problem.

• If the lamp is still off while the drum is running, remove panel f ass'y and check if 120v voltage is applied

to the lamp.

• If 120v voltage is not applied to the lamp, replace the door switch.

Cf) If the lamp is off even though the 120v voltage is being applied, replace the lamp.

4. Procedure of replacement

① Plate Top remove

② Panel F Ass'y remove

③ Cabinet Front Ass'y remove

④ Remove the wires. Press both ends of the switch and pull.

⑤ Assemble the parts in reverse order.

Switch Door

Door Switch

Part Code : 3619047700

Table of Contents