FRONT FRAME
Removing the front frame
1. Remove the motor in accordance with the
section
"Motor
removing...".
2. TDC33: Remove the hooked exhaust duct
by twisting it free.
3. Remove the wire bundle from the cable
clamps on the front frame.
4. Remove the fan housing cover (4 snap fasten-
ers and 1 screw).
5. Take out the thermistor with the aid of flat-
nose pliers.
6. Open the front door.
7. Unscrew the 4 screws that secure the front fra-
me to the front panel.
8. Lift out the front frame.
Installing the front frame
9. Offer up the front frame against the front
panel.
10. Tighten the 4 screws that secure the front fra-
me to the front panel.
11. Install the thermistor.
12. Install the fan housing cover (4 snap fasteners
and 1 screw).
13. Put the cable bundle into the cable clamps.
14. TDC33: Install the exhaust duct hook by pres-
sing it on to the front frame exhaust lip.
15. Install the motor in accordance with the sec-
tion
"Motor
installation...".
SERVICE
51