Memory Card Settings; Reading Fonts; Reading Macro Data; Reading Data - Oce OP30C Operation Manual

2. Printer Settings
Item No.

Deleting data

63
Deletes the selected data from the RAM
disk.

Deleting font data

64
Deletes the selected font data from the RAM
disk.

Deleting program data

65
Deletes the selected program data from the
RAM disk.

Deleting macro data

66
Deletes the selected macro data from the
RAM disk.
Partition List print out
67

Reading fonts

68
If "OK" is selected here, the font data in the
Memory Card will be read all at once.

Reading macro data

69
If "OK" is selected here, the macro data in
the Memory Card will be read all at once.

Reading data

70
Reads the selected data in the Memory
Card.

Reading program data

71
Reads the selected program data in the
Memory Card.

Writing data

72
If "OK" is selected here, the machine will
enter a "waiting for data" state until data is
sent from the host computer. To exit this
state, select the "GO" command in the
printer mode and then press the Enter key.
Deleting data
73
Deletes the selected data from the Memory
Card.
Item Display message Available settings
Delete Data Select the name of
the partition which
holds the data from
among those
displayed.
Delete Font Select the name of
the font from among
those displayed.
Delete Program Select the name of
the partition which
holds the program
from among those
displayed.
Delete Macro Select the name of
the partition which
holds the macro
from among those
displayed.
List of Partitions No, Print
Read Fonts OK
Read Macro OK
Read Data Select the name of
the partition which
holds the data from
among those
displayed.
Read Program Select the name of
the partition which
holds the program
from among those
displayed.
Write Data OK
Delete Data Select the name of
the partition which
holds the data from
among those
displayed.
2-14
Remarks
Displayed only when there is
appropriate data in the RAM disk.
Displayed only when there is
appropriate font data in the RAM
disk.
Displayed only when there is
appropriate program data in the
RAM disk.
Displayed only when there is
appropriate macro data in the RAM
disk.
Displayed only when "On" is
selected under the "RAM disk ON/
OFF" setting (item No.: 58).
Displayed only when there is
appropriate font data in the
Memory Card.
Displayed only when there is
appropriate macro data in the
Memory Card.
Displayed only when there is
appropriate data in the Memory
Card.
Displayed only when there is
appropriate program data in the
Memory Card.
Displayed only when the Memory
Card is installed.
Displayed only when there is
appropriate data in the Memory
Card.