Oce OP30C Operation Manual page 64

10. Windows KX Driver
10-3 Layout Tab
Pages per Sheet:
Allows you to print reduced images of multiple (1, 2, 4, 6, 9, 16 or 25) pages onto a single sheet of paper. This function is called "N-Up"
printing (where "N" equals the number of image pages). Reduction of the images is calculated automatically so that all of the selected
pages fit onto the single sheet of paper. The factory default setting is "1" (one page to each sheet of paper).
Example: With 2-Up printing
Prints reduced images of 2 full pages onto a single sheet of paper.
Print Borders
Prints border lines between the different images when the "Pages per Sheet" function is selected.
Layout
Specifies the order of display of the images when the "Pages per Sheet" function is selected.
Scaling (20 – 500%)
Allows enlargement or reduction of the image size.
Note
The image size will normally be enlarged or reduced according to the difference in the setting made in the "Page Size" and "Print Size"
fields. If you then change the setting here, the actual magnification will be based on the original settings and the image may be even
further enlarged or reduced.
Gutter Settings...
Click this button to open the "Gutter Settings" dialog box and set the margin for the left side of the paper.
Print on Both Sides "Duplex"
Select this checkbox by clicking on it and putting a check mark in the box in order to perform Duplex (2-sided) printing. You can then select
the desired image direction for each side of the paper.
[Flip on Long Edge] ............................ Select this option when making duplex prints in order to have the image on the two sides of the
[Flip on Short Edge] ............................ Select this option when making duplex prints in order to have the image on the two sides of the
* Available only in duplex copiers.
* Paper sizes, types and source of paper feed that are acceptable for duplex printing are as follows:
Paper sizes: Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Ledger (11" x 17"), Statement (5 1/2" x 8 1/2"), A3, A4, A5,
Folio (210 mm x 330 mm), JIS B4 and B5 (JIS)
Paper types: Plain, Recycled, Color, Preprinted, Rough, Prepunched, Bond, Letterhead, Custom 1 to 8
Paper types: Plain, Recycled, Color, Preprinted, Rough, Prepunched, Bond, Custom 1 to 8
Source of paper feed: Any tray EXCEPT the Bypass Tray
paper printed in the same direction as each other, as though the paper was turned over along its
longer edge.
paper printed in the opposite direction from each other, as though the paper was turned over along
its shorter edge.
10-4