Oce OP30C Operation Manual page 32

4. e-MPS Functions
4-2 Quick Copy
This mode allows you to make additional printouts of a document that was already printed out once.
If printing is carried out while Quick Copy is selected in the printer driver, the data for the document being printed out will also be stored
onto the printer's Hard Disk. The desired number of copies can be printed out again using the printer's operation panel whenever neces-
sary.
The factory default setting for the number of documents that can be stored in the Hard Disk is "32" (this can be changed to a maximum of
50 documents in the e-MPS settings). If the number of stored documents exceeds the set maximum number of documents, the new data
will successively be written over the oldest data.
All the received data will be erased whenever the main switch of the printer is turned OFF (O).
Perform the following procedure when you want to print out additional documents using the printer's operation panel.
* For more information on how to select the printer driver settings, refer to "10-7-1 Printing with the e-MPS (Job Storage) function" on page
10-12.
4-2-1 Procedure for printing out additional copies with Quick Copy
Press the Printer key. The machine will switch to the printer mode.
1
Use the "M" and "N" cursor keys to select "MENU" and then press the Enter key.
2
Use the "M" and "N" cursor keys to select "e-MPS" and then press the Enter key.
3
Inch specification
Metric specification
Inch specification
Metric specification
Inch specification
Metric specification
4-2