Oce OP30C Operation Manual page 35

4. e-MPS Functions
4-4 Private Print / Stored Job Printing
The Private Print function aims at protecting the confidentiality of the documents to be printed. Print out is accomplished by entering into
the operation panel a 4-digit access code that was previously registered in the printer driver. After print out, the document data will be
erased from the printer's memory. If the job is put on hold, the printed data will be stored and will remain on the Hard Disk. In order to print
out whenever necessary, choose to keep the job on hold in the printer driver. Even if the main switch of the printer is turned OFF (O), the
data that was stored and put on hold will not be erased.
Perform the following procedure in order to print out using the printer's operation panel.
* For more information on how to select the printer driver settings, refer to "10-7-1 Printing with the e-MPS (Job Storage) function" on page
10-12.
4-4-1 Procedure for printing out in the Private Print / Stored Job Printing mode
Press the Printer key. The machine will switch to the printer mode.
1
Use the "M" and "N" cursor keys to select "MENU" and then press the Enter key.
2
Use the "M" and "N" cursor keys to select "e-MPS" and then press the Enter key.
3
Inch specification
Metric specification
Inch specification
Metric specification
Inch specification
Metric specification
4-5