Oce OP30C Operation Manual page 34

4. e-MPS Functions
4-2-2 Deleting documents stored for Quick Copy
Follow steps 1 through 6 of the previous procedure and select the document data
1
that you want to delete.
Use the "M" and "N" cursor keys to select "Delete" and then press the Enter key.
2
The selected document data will be deleted.
4-3 Proof and Hold
When printing out multiple pages or several copies, this mode allows you to print out only one page first, check the result and then print out
the remaining pages if everything is okay. As the result of the print out can be checked before printing out all the remaining pages or
copies, this function helps you to save on copy paper.
Select Proof and Hold in the printer driver and then set the desired number of copies. The printer will print only one copy of one page and
store the document data on the Hard Disk. Use the printer's operation panel to print out the remaining number of copies. At this point, it is
possible to change the number of copies or to cancel the whole printing job, as desired.
* For more information on how to select the printer driver settings, refer to "10-7-1 Printing with the e-MPS (Job Storage) function" on page
10-12.
4-3-1 Procedure for printing out the remaining number of copies that was on hold
The procedure is the same as that for printing out with the Quick Copy function. Follow the procedure described on the previous page.
Inch specification
Metric specification
Inch specification
Metric specification
4-4