Oce OP30C Operation Manual page 46

7. Printer control commands
7-7 Printing out the Partition List
Perform the following procedure when you want to print out the Partition List in order to verify the print data and font data that has been
saved on a Memory Card, the Hard Disk or RAM disk.
* Partition List print out can be accomplished from the operation panel on the printer itself. Refer to "2. Printer Settings" on page 2-1 for
information on the appropriate procedure.
Procedure
1 Open an MS-DOS Prompt in Windows.
2 Type in the command to print out the Partition List and then press the ENTER key.
[Example] To print out the Partition List for a Memory Card
* To print out the Partition List for the Hard Disk or RAM disk, simply change the "A" parameter to "0". If you do not include this parameter,
all of the Partition Lists will be printed out.
C:\WINDOWS>ECHO !R! RWER L,A; EXIT;>LPT1_
3 Print out of the Partition List will begin.
7-8 Auto Partition List print out ON/OFF
It is possible to have a Partition List printed out automatically any time data is written to a Memory Card, the Hard Disk or RAM disk.
Perform the following procedure when you want to change the setting for automatic print out.
Procedure
1 Open an MS-DOS Prompt in Windows.
2 Type in the command to have the Partition List printed out automatically and then press the ENTER key.
[Example] To turn Auto Partition List print out ON
* To turn Auto Partition List print out OFF, simply change the "E" parameter to "D".
C:\WINDOWS>ECHO !R! RWER I,E; EXIT;>LPT1_
7-4