Oce OP30C Operation Manual page 49

8. Printer Settings
Display message
RAM disk error Press GO
RAM DISK ERROR PRESS GO
MemoryCard err Press GO
MEMORYCARD ERR PRESS GO
Code:##
Check the error code displayed in place of ## and refer to the following.
01: Format error. Turn power OFF and ON again.
02: The RAM disk mode is OFF. Turn it ON.
03: A write error has occurred. Turn OFF write protection.
04: The RAM disk does not have enough area to store the data. Delete any unnecessary data
to make more room.
05: The selected file could not be found. Check the file name and whether it is on the RAM disk
or not.
06: There is not enough system memory. Increase memory capacity.
98: Some of the data being collated was not read. Job data is corrupt.
Code:##
Check the error code displayed in place of ## and refer to the following.
01: Format error. Reformat the memory card.
02: Memory card load error. Correctly load the memory card.
03: A write error has occurred. Turn OFF write protection.
04: The memory card does not have enough area to store the data. Delete any unnecessary
data to make more room.
05: The selected file could not be found. Check the file name and whether it is on the memory
card or not.
8-3
Procedure