Oce OP30C Operation Manual page 85

11. Printer Driver for Macintosh
11-5 Printer Specific Options
Resolution:
The resolution setting can not be changed from "600 dpi".
Eco Print:
Saves on toner. The factory default setting is "Off".
Edge Smoothing:
Turning this setting "On" allows the jaggies that appear around the edge of text and graphics to be evened out through the smoothing
process.
PagePolicy:
Perform this setting in conjunction with the settings to be made under "Paper source" on page 11-4.
[Auto Size Select] ...................... Select this setting when you want to select the source of paper feed according to the type of paper
[Cassette Base] ......................... Select this setting when you want to select the source of paper feed according to the tray under
* If you are going to select "Auto Select" under "Paper source", be sure to select "Auto Size Select" here or there is a possibility that
printing will be accomplished onto paper that is difference the expected.
Job Storage:
The following printing functions can be selected:
[Sort Only] ........................................ When you want to print out multiple sets of the same copies, the copy sets will be printed and
[Temporary Job] .............................. Select this function to have the print job data stored temporarily onto the printer's hard disk. This
[Permanent Job] .............................. Select this function to have the print job data stored permanently onto the printer's hard disk. The
[Virtual Mailbox (Administrator)] ... The document data will be saved into the administrator's virtual mailbox.
[Virtual Mailbox (User 1-10)] ........... Allows you to designate the specific virtual mailbox in which the document data will be stored.
(you are going to select "Auto Select" under "Paper source").
"Paper source".
ejected one at a time.
will increase the speed of printing when printing multiple sets of the same copies. If the area
allocated for saving data becomes full, the data for the oldest print job will be deleted in order to
make sufficient space.
document data will be retained on the hard disk even if the area allocated for saving data be-
comes full.
11-6