Oce OP30C Operation Manual page 59

9. Procedure for Installing and Printing with a Printer Driver
9-6 Printing
The following is an example procedure for printing using a printer driver under the conditions and environment noted below.
• OS:
• Printer driver:
• Application:
• Printing conditions: Print and staple
If you use a system or driver other than that noted above, use the following procedure simply as a reference tool.
Making the printer driver settings in Windows
1
Click on "Start" on the Task Bar.
The Start menu will appear.
Use the mouse to point to "Settings" and click on "Printers" in the corresponding
2
submenu.
The "Printers" folder will open.
Use the right mouse button to click on the icon for this printer. A pop-up menu will
3
be displayed.
Select "Properties" from that menu.
The Properties window will appear.
Click on the "Device Settings" Tab.
4
Perform the following settings in order to staple your printed sets.
5
"Device Options" setting
1 Put a check mark in the "Finisher" checkbox.
2 Put a check mark in the "RAM Disk" checkbox and set the memory size of the
RAM disk. (This setting must coincide with the setting in the printer.)
* If the optional hard disk is installed, put a check mark in the "Hard Disk"
checkbox.
Once you have completed these settings, click on "OK".
Windows 98
KX Driver
Wordpad
9-8