Oce OP30C Operation Manual page 28

2. Printer Settings
Continue the same procedure for the other 2 blocks and, once the IP address has
13
been entered, press the Enter key.
Use the "M" and "N" cursor keys to select "Subnet Mask" and then press the Enter
14
key.
Repeat steps 11 - 13 in order to enter the Subnet Mask using the same procedure
15
that you did for entering the IP address.
Use the "M" and "N" cursor keys to select "Gateway" and then press the Enter key.
16
Inch specification
Metric specification
Inch specification
Metric specification
Inch specification
Metric specification
Inch specification
Metric specification
2-22