Oce OP30C Operation Manual page 41

6. Memory Card
6. Memory Card
This machine comes equipped with a slot for inserting a Memory Card.
Use a Memory Card that contains fonts in order to print with fonts other than those already installed in the machine, or use the card to save and then
read print data.
6-1 Inserting the Memory Card
Insert the Memory Card into the slot carefully with the front of the card facing the rear of the machine.
IMPORTANT!
BE SURE to turn the main switch OFF (O) BEFORE inserting or removing the Memory Card.
* The Memory Card is managed from the operation panel on the printer itself. Refer to "2. Printer Settings" on page 2-1 for information on the
appropriate procedure.
6-2 Formatting the Memory Card
Perform the following procedure when you want to initialize the Memory Card.
IMPORTANT!
Initializing the Memory Card will erase all data in the card. Make sure that you want to initialize that Memory Card before starting the
procedure.
Insert the Memory Card that you want to initialize into the Memory Card slot.
1
Press the Printer key. The machine will switch to the printer mode.
2
Inch specification
Metric specification
6-1