Oce OP30C Operation Manual page 56

9. Procedure for Installing and Printing with a Printer Driver
Select the driver type.
7
From the list, select the type of driver to be installed, then click "Next".
All available options will be displayed. Select the items that you want to install and
8
then click on the "Next" button.
Select the connection type: Local or Network.
9
• Local: The printer is connected directly to the parallel port.
• Network: The printer is connected to the printer via network (using a network
interface).
* If Local is selected, proceed to step 11. If Network is selected, proceed to step
10.
Enter the network queue name or the path for the network queue in the box.
10
To select another network queue name, press "Browse".
If you are going to use a local port for the network queue, click the check box
displayed below, then proceed to step 11.
Otherwise, proceed to step 12.
Select a printer port. From the list, select the desired port, then click "Next".
11
* Normally, set to LPT1.
* When installing the printer driver for Windows NT, the "Add" LPR Port button will
appear below the box, so press the button to set the desired LPR printer.
9-5