Features Of The Printer - Oce OP30C Operation Manual

1. Features of the Printer

1. Printer Settings (15 ppm copier)
This printer comes equipped with the following features.
KIR (Kyocera Image Refinement)
A smoothing function exclusive to Kyocera. This function uses software to increase the resolution of the printer and ensure high-quality printing. The
factory default setting for this function is "ON". (This function is available for black and white printing only.)
High-Speed Printing
The printing speed can reach up to 30 pages per minute (11" x 8 1/2" [A4]) for black and white printing and up to 8 pages per minute (11" x 8 1/2" [A4])
for full color printing. (These speeds are applicable when making multiple copies of the same document. Actual printing speed will differ depending
upon the content of the print job.)
Media type selection
If different types of copying media (standard copy paper, OHP transparency film, label sheets, etc.) are set in the various locations for paper feed, the
printer will automatically select the type of paper that was designated for that particular print job.
EcoPrint
This printer comes equipped with an EcoPrint function that enables the reduction of toner consumption. By using the EcoPrint function, the same
quantity of toner will last longer. (This function is available for black and white printing only.)
Two-Way Parallel Interface
Data transfer from your computer to the printer is accomplished using an IEEE 1284 parallel interface.
Printer Control Commands
This printer has built-in Printer Control Commands (PRESCRIBE) with improved graphic functionality. A simple command will enable you to change
the margin setting, the character- or line-spacing, to rotate or fill in outlined fonts and graphics, and much more.
e-MPS Functions
This printer comes equipped with e-MPS (enhanced-Multiple Printing System) functions. With these functions, document data can be stored on the
Hard Disk (option) that is installed in the printer and printed out afterwards using the printer's operation panel. Available e-MPS functions include Quick
Copy, Proof and Hold, Private Print, Stored Job Printing (Job Storage), Virtual Mailbox (VMB), Temporary/Permanent Code Job and Electronic
Sorting.
Hard Disk
The optional Hard Disk can be installed in the printer. By installing the optional Hard Disk in your printer, you will be able to use the available e-MPS
functions as well as increase the efficiency of your printer with electronic sorting.
Memory (Compact Flash) Card Slot
The optional Memory Card can be installed in the printer. By installing the optional Memory Card in your printer, you will be able to use the optional
fonts, macro, and form functions, etc.
1-1