Oce OP30C Operation Manual page 15

2. Printer Settings
Item No.
NetWare ON/OFF
19
NetWare frame type
20
Sets the NetWare frame type.
TCP/IP ON/OFF
21
DHCP ON/OFF
22
IP address
23
Subnet Mask
24
Gateway address
25
EtherTalk ON/OFF
26
Network Card Status Page print out ON/
27
OFF
Sets whether a Status Page regarding
conditions in the Network Card will be
printed out as well when the standard Status
Page for the printer (item No.: 1) or that for
use by your service representative (item No.:
99) are printed out. A more detailed Status
Page is printed out together with the
"Service Rep Status Page print out" setting
(item No.: 99).
Item Display message Available settings
NetWare On, Off
NetWare Frame Auto, 802.3,
Ethernet II, 802.2,
802.3 SNAP
TCP/IP On, Off
DHCP On, Off
IP Address Enter the address.
Subnet Mask Enter the address.
Gateway Enter the address.
EtherTalk On, Off
Opt. StatusPage On, Off
2-9
Remarks
Displayed only when the NetWare
setting is turned "On".
Refer to "2-4 Network (TCP/IP)
settings" on page 2-19 for the
procedure on setting the network
addresses.