Omron Z302-E1-03 User Manual page 132

• I/O Signal Allocations
Signal
Output signals OUT1 (BUSY signal)
Input signals IN0
IN1
IN2
IN3
IN4
IN5
Setting the Outputs
Using the Overall Judgement Result
When the results of the inspection items are judged, if even one individual judgement result is NG, the OR
output signal is turned ON.
Individual judgement results
Inspection
OK
item 0
NG
Inspection
item 1
Inspection
OK
item 31
*1
Expression
OK
*1: When judgement results from calculations are set to be reflected in overall judgement.
Note
The overall judgement result output signal can also be turned ON when all individual judgement results are OK.
Changing the judgement output ON condition: p. 136
Wiring
Color Signal
Black OUT0 (OR)
FQ User's Manual
Address
CIO 0.01
CIO 1.08
CIO 1.09
CIO 1.10
CIO 1.11
CIO 1.12
CIO 1.15
Overall judgement
NG (OR signal ON)
If there is even one NG judgement,
the overall judgement will be NG
and the output will be turned ON.
Description
Overall judgement (default
assignment)
The signals shown at the left are used.
Refer to the following information for signal wiring.
2-4 Wiring: p. 28
Controlling/Outputting in Parallel
131