Omron Z302-E1-03 User Manual page 176

In/Out Tab Page
Description
Menu command
Statistical data Sets whether to record the number of
measurements and the number of NG
overall judgements.
Image logging Sets the parameter to log measurement
image data.
Data logging Sets the parameter to log measurement
data from inspection items.
Delete Log Resets the log data without turning OFF
the power supply.
OUT0 Used to assign output signals to OUT0,
OUT1, and OUT2.
OUT1
OUT2
Output polarity Sets the ON condition for the OR signal. OK: ON or NG: ON (default)
Output mode Sets the output timing for the judgement
result.
Output delay When one-shot output mode is selected,
this parameter sets the delay from when
measurement processing is completed
until when the OR signal turns ON.
Output time When one-shot output mode is selected,
this parameter sets the time that the OR
signal is ON.
BUSY output Specifies when to turn OFF the BUSY
signal after starting measurement pro-
cessing.
BUSY polarity Sets the ON condition for the BUSY sig-
nal output.
Input mode Specifies whether to use functions other
than scene switching for external parallel
commands.
FQ User's Manual
Setting range
ON (default) or OFF
All, Only NG, or None (default)
All (default), Only NG, or None (default)
---
OR (Total judgement) (default) or OR0
(Item0 judgement) to OR31 (Item31
judgement)
BUSY (default) or OR0 (Item0 judge-
ment) to OR31 (Item31 judgement)
ERROR (default) or OR0 (Item0 judge-
ment) to OR31 (Item31 judgement)
One-shot output or Level output (default) System
0 to 1,000 ms (default: 0 ms)
0 to 1,000 ms (default: 5 ms)
Measurement (default), Data logging,
Image logging, or Result display
BUSY: ON (default), READY: ON
Standard mode (default) or Expanded
mode
Data Refer-
ence
System p. 114
System p. 110
p. 114
System
--- p. 114
System p. 132
System
System
System p. 136
p. 134
System
System
System p. 112
System p. 136
System p. 137
175
Menu Tables