System Configuration - Omron Z302-E1-03 User Manual

Vision sensor
Table of Contents

Advertisement

2-1 System Configuration

Parallel Interface Connection
Setup Tool
Touch Finder or PC Tool
Connecting to Ethernet
Setup Tool
Touch Finder or PC Tool
Multiple Connection Sensors
Setup Tool
Touch Finder or PC Tool
Product
Model number
FQ Vision Sensor
FQ-S@@@@@@
Touch Finder
FQ-D@@
PC Tool
---
FQ Ethernet Cable
FQ-WN0@@
Standard RJ45
---
*1
Ethernet Cable
I/O Cable
FQ-WD0@@
Switching Hub
W4S1-0@@
*1: The shape and dimensions of the Ethernet connector plug and jack are specified in ISO/IEC8877:1992 (JIS X 5110:1996) and RJ-45 of the
FCC regulations. To prevent connector connection failures, the structure of the jack of this product does not allow insertion of plugs that do not
comply with the standard. If a commercially available plug cannot be inserted, it is likely that the plug is non-compliant.
Important
Do not connect network devices other than PLCs on the same network as the Touch Finder or computer. If
another device is connected, the responsiveness of displays and settings of the Touch Finder or computer may
become slow.
20

System Configuration

FQ Vision Sensor
FQ Ethernet Cable
24-VDC power supply
Switching Hub
Standard RJ45
Ethernet Cable
24-VDC power
supply
Standard RJ45
Ethernet Cable
Switching Hub
Standard RJ45 Ethernet Cable
Remarks
This is the Vision Sensor.
This is a setup console.
The PC Tool can be used instead of the Touch Finder. If you register as a member, you can
download the free PC Tool as a special service to purchasers.
Refer to the Member Registration Sheet that is enclosed with the Sensor for the member
registration procedure and the download procedure for special member software.
Connects the Sensors to external devices such as the Touch Finder, computers, and PLCs.
Connects the Switching Hub to the Touch Finder, computers, and PLCs. Use a connector
that complies with the FCC RJ45 standard. (STP (shielded twisted-pair) cable, category 5e
or 6, impedance: 100 Ω)
Connects the Sensor to the power supply and external devices.
Used to connect multiple Sensors to one Touch Finder or PC Tool.
I/O Cable
24-VDC power
supply
Standard RJ45 Ethernet Cable
FQ
Sensor
I/O Cable
FQ Vision Sensors (8 max.)
FQ Ethernet Cable
Trigger Sensor
PLC
PLC to control Sensor
24-VDC power
supply
FQ User's Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents