Omron Z302-E1-03 User Manual page 178

Test Tab Page
Menu command Description
Continuous test Used to check the individual judgement
results for the inspection items and to
adjust the judgement parameters.
Graphic Displays the input image.
Graphics + Details Displays the inspection item individual
judgement results and measurement val-
ues.
All results/Region Displays the inspection item individual
judgement results for all inspection
items.
Trend Monitor Displays the individual judgement results
saved in the Sensor in a trend monitor.
Histogram Displays the individual judgement results
saved in the Sensor in a histogram.
Adjust Adjusts judgement parameters without
judgement stopping measurements.
Auto Automatically adjusts the judgement
adjustment parameters by using actual workpieces
which are considered as good or faulty
products.
Method Selects the expression to use to auto-
matically adjust the judgement parame-
ters.
Auto display Same as the trend monitor and histogram for [Run] Mode.
(trend monitor and
histogram only)
Display range
(trend monitor and
histogram only)
Number of data
(trend monitor only)
Number of data
(histogram only)
Save data Saves scene data and system data.
Run Tab Page (from Setup Display)
Menu command Description
Switch to Run mode Switches to Run Mode.
FQ User's Manual
Setting range
---
---
OK Teach, NG Teach
Threshold (minimum), Threshold (aver-
age) (default), or Threshold (maximum)
---
Setting range
---
Data Refer-
ence
--- p. 86
p. 91
p. 86
Scene p. 89
--- p. 98
p. 99
p. 98
p. 99
--- p. 92
Data Refer-
ence
--- p. 94
177
Menu Tables