Configuring The Run Mode Display - Omron Z302-E1-03 User Manual

6-2 Configuring the Run Mode Display

There are six types of displays that can be used, as shown below.
Select the display as desired.
Checking the Judgement Results of Inspection Items
Graphics
The image and region currently being
measured will appear.
Checking the Judgements of All
Inspection Items in a List
All results/region
(Standard Models Only)
The judgement results of all inspection
items can be checked in a list.
(Run Mode) − [Select display]
The following displays are convenient if more than one Sensor is connected.
Multi sensor
Displays the measurement results of
all connected Sensors.
Green display: OK, Red display: NG
(Run Mode) − [Sensor monitor]
96

Configuring the Run Mode Display

Graphics + Details
In addition to [Graphics] display, indi-
vidual judgement results and measure-
ment values of selected inspection
items will appear.
Displaying Measurement Result Histories
Trend monitor
The statistical data for the currently
selected inspection item can be
checked against time.
p. 98
NG sensor
Automatically changes to the display for
any Sensor with an NG result.
Checking the Overall Judgement Result History
Statistical data
The currently measured image and history of
the overall judgement results (measurement
count, NG count, and NG rate) will appear.
Histogram
The distribution of measurement results of the
currently selected inspection item can be
checked.
p. 99
FQ User's Manual