Removing And Installing The Fixed Power Supply; Removing The Fixed Power Supply; Figure 94. Secure The Double Width Card With Double Width Card Bracket; Figure 96. Top View Of A Double Width Card Extender Example - Intel P4000M Service Manual

Figure 94. Secure the Double Width card with Double Width Card bracket

The following figures show an example of the GPGPU bracket.
Figure 95. Side View of a Double Width Card Extender Example

Figure 96. Top View of a Double Width Card Extender Example

Removing and Installing the Fixed Power Supply

WARNING
Hazardous voltage, current, and energy levels are present inside the power supply. There are no
user-serviceable parts inside it; servicing should be done by technically qualified personnel.

Removing the Fixed Power Supply

1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover".
4. Remove the air duct if it is installed. For instructions, see "Installing the Airduct".
5. Disconnect all internal power cables from chassis components and server board.
6. Rotate the power supply locking device counter-clockwise (see letter A) and remove the fixed power
supply (see letter B).
®
Intel Server Chassis P4000M Service Guide
Hardware Installations and Upgrades
59