9.
Reinstall the HDD carrier tray into chassis.
10. Install the Fixed HDD EMI shield. For instructions, see "Installing the Fixed HDD EMI Shield".
11. Install the front bezel. For instructions, see "Installing the Front Bezel".
12. Install the air duct if the air duct is removed. For instructions, see "Removing the Airduct".
13. Install the chassis cover. For instructions, see "Installing the Chassis Cover".
14. Plug all peripheral devices and the AC power cable into the server.
15. Power up the server.
Installing Fixed Hard Drive(s)
1.
Observe the safety and ESD precautions at the beginning of this book.
2.
Power down the server and unplug all peripheral devices and the AC power cable.
3.
Remove the chassis cover. For instructions, see "Removing the Chassis Cover".
4.
Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel".
5.
Remove the Fixed HDD EMI shield. For instructions, see "Removing the Fixed HDD EMI Shield".
®
Intel
Server Chassis P4000M Service Guide
Figure 42. Removing the 2.5" HDD from Fixed HDD tray
Figure 43. Reinstalling the HDD Carrier Tray
Hardware Installations and Upgrades
27