Installing 2.5" Hotswap Hard Disk Drive In 3.5'' Hdd Carrier; Figure 73. Sliding The 3.5" Hdd Carrier Into The Chassis; Figure 74. Removing The 3.5" Hdd Interface Bracket From Carrier - Intel P4000M Service Manual

Hardware Installations and Upgrades
5. With the lever open, insert the hard disk drive assembly into the cage opening and push until the locking
lever engages (see letter A).
6. Push in the lever to lock it into place (see letter B).
7. Close the HS HDD door.

Installing 2.5" Hotswap Hard Disk Drive in 3.5'' HDD Carrier

1. Remove the four screws securing the 3.5" HDD interface bracket and remove the 3.5" HDD interface
bracket.

Figure 74. Removing the 3.5" HDD interface bracket from Carrier

48

Figure 73. Sliding the 3.5" HDD Carrier into the Chassis

®
Intel Server Chassis P4000M Service Guide