Hardware Installations and Upgrades
7.
Install the 2.5" hard disk drive using the same four screws as shown. Make sure the connector end of the
drive matches the backplane connector (see letter F).
8.
With the lever open, insert the hard disk drive assembly into the cage opening and push until the locking
lever engaged (see letter G).
9.
Push in the lever to lock it into place (see letter H).
10. Close the hotswap HDD door.
52
Figure 80. Installing the 2.5
Figure 81. Installing the 2.5" HDD into the Chassis
HDD in Carrier
''
®
Intel
Server Chassis P4000M Service Guide