Installing And/Or Removing Airduct; Installing The Airduct; Figure 31. Installing The Airduct - Intel P4000M Service Manual

Hardware Installations and Upgrades

Installing and/or Removing Airduct

/
NOTE
Airduct may need to be ordered separately. See Configuration Guide of the server board for which airduct
work with your server board. The installation and/or removing airduct steps in below is generic. Please
see your board or system documents for specific instructions about installing and/or removing airduct.

Installing the Airduct

1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover".
4. Install the airduct by matching the alignment tabs on airduct and the alignment holes on chassis
bracket.
20

Figure 31. Installing the Airduct

®
Intel Server Chassis P4000M Service Guide