Table of Contents
Advertisement
Hardware Installations and Upgrades
Removing a DVD or CD-ROM Drive
1.
Observe the safety and ESD precautions at the beginning of this book.
2.
Power down the server and unplug all peripheral devices and the AC power cable.
3.
Remove the chassis cover. For instructions, see "Removing the Chassis Cover".
4.
Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel".
5.
Disconnect the power and data cables to the DVD/CD-ROM drive.
6.
Press on the slide release latches (see letter A in the following figure) and pull the DVD/CD-ROM
drive/slide assembly from the chassis (see letter B in the following figure). Remove the slides from
the DVD or CD-ROM drive (see letter C).
7.
If not replacing with another drive, reinsert an EMI shield into chassis (see below illustration).
54
Figure 84. Removing DVD or CD-ROM Drive
Figure 85. Re-inserting Empty EMI Shield
®
Intel
Server Chassis P4000M Service Guide
Advertisement
Table of Contents
