Installing 8x3.5'' Hotswap Backplane
1.
Remove all hotswap drive carriers, regardless of whether or not a drive is installed in the carrier.
2.
Attach the backplane to the back side of the hotswap drive cage, and make sure the hooks on the
cage are inserted in the backplane holes (see letter A).
3.
Push the backplane (see letter B) and secure the backplane with the screw (see letter C).
®
Intel
Server Chassis P4000M Service Guide
Figure 58. Removing 8x3.5" Hotswap Backplane
Figure 59. Installing 8x3.5
Hardware Installations and Upgrades
Hotswap Backplane
''
37