Figure 71. Removing The 3.5" Hdd Interface Bracket From Carrier; Figure 72. Installing The 3.5" Hdd Into The Carrier - Intel P4000M Service Manual

3. Remove the four screws securing the 3.5" HDD interface bracket and remove the 3.5" HDD interface
bracket.

Figure 71. Removing the 3.5" HDD interface bracket from Carrier

4. Install the 3.5" hard disk drive using the same four screws as shown. Make sure the connector end of the
drive matches the backplane connector.
®
Intel Server Chassis P4000M Service Guide

Figure 72. Installing the 3.5" HDD into the Carrier

Hardware Installations and Upgrades
47