Table of Contents
Advertisement
Hotswap SAS/SATA Backplane
The Hotswap SAS/SATA backplane serves as an interface between the motherboard and the system
drives. The following diagrams show the location for each connector found on the backplane:
4x3.5''
Hard Drive Backplane
®
Intel
Server Chassis P4000M Service Guide
2
A. I
C_In Connectors
B. SATA/SAS Cable Connectors
C. Power Connectors
D. SATA 6X Mode Connector
2
E. I
C_Out Connector
F. SGPIO Connector
Figure 12. 4x3.5'' HSBP Board (Rear View)
Server Chassis Features
9
Advertisement
Table of Contents
