Slimline Optical Drive Support; Bezel; Hot-Swap Sas/Sata Backplane; Figure 11. Front View Of Front Bezel - Intel R1000EP Series Service Manual

Server System Features

Slimline Optical Drive Support

The system has support for a single optical drive. The optical drive is NOT hot-swappable. The
system power must be turned off to insert or remove the slimline optical drive. For instructions on
installing an optical drive, see "Installing or Removing a Slimline Optical Drive".
®
Intel makes the following optical drive accessory kits available for this server system:

Slimline DVD-ROM Drive: AXXSATADVDROM

Slimline DVD-RW Drive: AXXSATADVDRWROM
Note: For a complete list of supported peripherals, go to http://serverconfigurator.intel.com.

Bezel

The front bezel is available as optional accessory for the server system:

Hot-Swap SAS/SATA Backplane

The Hot-Swap SAS/SATA backplane serves as an interface between the mother board and the
system drives. The following diagrams show the location for each connector found on the
backplane.
4 x 3.5-inch Hard Drive Backplane

Figure 12. 4 x 3.5-inch Hard Drive Backplane Components (Front View)

10

Figure 11. Front view of Front Bezel

A SAS/SATA Hot-swap Connectors
®
Intel Server System R1000EP Service Guide