Msi/Plessey Length 2 - Datalogic Magellan 8500Xt Product Reference Manual

MSI/Plessey Length 2

NOTE
Product Reference Guide
If MSI/Plessey Length Control is set to Fixed-Length decoding, this fea-
ture specifies MSI/Plessey second fixed length. If MSI/Plessey Length
Control is set to Variable-Length decoding, this feature specifies the maxi-
mum label length.
When in Fixed Length mode, if Length 2 is set to the value 00 (zero), then
only Length 1 will apply.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan the barcode, SET MSI/PLESSEY LENGTH 2 below. You'll
need to cover any unused barcodes on this and the facing page to
ensure that the scanner reads only the barcode you intend to scan.
3. Scan the appropriate digits from the keypad in
represent the desired label length. The selectable range for this
option is 0 (zero), or 4 to 16. Pad all single digit numbers with a
leading zero to yield a two-digit entry (00, 04-16).
4. Complete the programming sequence by scanning the SWITCH
barcode.
SET MSI/PLESSEY LENGTH 2
that
Appendix C
7-267