I 2 Of 5 Check Character Calculation - Datalogic Magellan 8500Xt Product Reference Manual

I 2 of 5 Check Character Calculation

If check character calculation is disabled, the risk is increased that a mis-
read can occur. When disabled, any check characters in a barcode are
treated as data characters.
NOTE
Product Reference Guide
Enables/disables calculation and verification of an optional Interleaved 2
of 5 check character.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan either the enable or disable barcode below. You'll need to
cover any unused barcodes on this and the facing page to ensure
that the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
I 2 of 5 CHECK CHARACTER CALCULATION = DISABLE
I 2 of 5 CHECK CHARACTER CALCULATION = ENABLE
7-231