MSI/Plessey Length 1
7-266
If MSI/Plessey Length Control is set to Fixed-Length decoding, this fea-
ture specifies MSI/Plessey first fixed length. If MSI/Plessey Length Con-
trol is set to Variable-Length decoding, this feature specifies the minimum
label length.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan the barcode, SET MSI/PLESSEY LENGTH 1 below. You'll
need to cover any unused barcodes on this and the facing page to
ensure that the scanner reads only the barcode you intend to scan.
3. Scan the appropriate digits from the keypad in
represent the desired label length. The selectable range for this
option is 4 to 16. Pad all single digit numbers with a leading zero
to yield a two-digit entry (04-16).
4. Complete the programming sequence by scanning the SWITCH
barcode.
SET MSI/PLESSEY LENGTH 1
Magellan
that
Appendix C
TM
8500Xt Scanner