Code 128 Length 2 - Datalogic Magellan 8500Xt Product Reference Manual

Code 128 Length 2

NOTE
Product Reference Guide
If Code 128 Length Control is set to Fixed-Length decoding, this feature
specifies Code 128 second fixed length. If Code 128 Length Control is set
to Variable-Length decoding, this feature specifies the maximum label
length.
When in Fixed Length mode, if Length 2 is set to the value of 00 (zero),
then only Length 1 will apply.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan the barcode, SET CODE 128 LENGTH 2 below. You'll
need to cover any unused barcodes on this and the facing page to
ensure that the scanner reads only the barcode you intend to scan.
3. Scan the appropriate digits from the keypad in
represent the desired label length. The selectable range for this
option is 01 to 80. Pad all single digit numbers with a leading
zero to yield a two-digit entry (01-80).
4. Complete the programming sequence by scanning the SWITCH
barcode.
SET CODE 128 LENGTH 2
that
Appendix C
7-225