Single Cable Rs-232 Use Etx - Datalogic Magellan 8500Xt Product Reference Manual

Single Cable RS-232 Use ETX

7-130
Enables/disables the ability of the scanner to use ETX.
To set this feature:
1. Scan the SWITCH barcode.
2. Scan either the enable or disable barcode below. You'll need to
cover any unused barcodes on this and the facing page to ensure
that the scanner reads only the barcode you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
barcode.
SINGLE CABLE RS-232 USE ETX = DISABLE
SINGLE CABLE RS-232 USE ETX = ENABLE
TM
Magellan 8500Xt Scanner