Ack Nak Retry Count - Datalogic Magellan 8500Xt Product Reference Manual

RS-232 ACK NAK Retry Count
A setting of 255 specifies "retry forever."
NOTE
7-116
This feature sets the number of times for the scanner to retry a label trans-
mission under a retry condition.
To set the RS-232 ACK NAK Retry Count:
1. Scan the SWITCH barcode.
2. Scan the barcode, SET RS-232 ACK NAK RETRY COUNT
below. You'll need to cover any unused barcodes on this and the
facing page to ensure that the scanner reads only the barcode you
intend to scan.
3. Scan the appropriate digits from the keypad in
represent the desired number. The selectable range is 0-255 resets.
Pad all single and double digit numbers with leading zeroes to
yield a three-digit entry (000-255).
4. The scanner will automatically exit Programming Mode when the
appropriate amount of digits have been scanned.
SET RS-232 ACK NAK RETRY COUNT
Appendix C
TM
Magellan 8500Xt Scanner
that